Cyclope® Machine is an effective anti-collision device for factories and warehouses

The functionality of Cyclope® Machine

The machine detector equipment, Cyclope Machine, has two operating units, which are installed in the forklift or other machine. When Cyclope Machine detects a signal from the person alarm-detector, Cyclope Move, the alarm units notify the driver about a person who is approaching the machine by giving a buzzer sound and a light signal. There are two alarming panels, one in the cabin and another in the rear part of the viachle.

Automation

The use of the anti-collision system does not require additional efforts from the users. Cyclope Machine automatically provides the driver the critical information about surrounding traffic in the operating area. The driver does not have to pay special attention to monitoring the environment and can fully concentrate on driving the vehicle. The Cyclope Machine is installed on the work machine and the Cyclope Move is attached to the person's work gear, and the start-up or operating does not require any other efforts. This minimizes the human errors of the users, which might occur if the devices had, for example, a separate ON/OFF switch one have to remember to push.

Hybrid-mode

The vehicle detection of Cyclope Machine can be switched on in places where there is occasional crossing traffic. In this so-called "hybrid-mode", the alarm is activated from both people carring Cyclope Moves and vehicles with Cyclope Machines. Read more about Cyclope Machine Hybrid.

Use cases

1. Forklifts in warehouses
2. Cranes and other large machinery in shipping and lumber yards
3. Autonomous trucks in industrial areas